Basement Waterproofing in Washington, DC
Capitol Hill, Petworth, Columbia Heights, Brookland, Anacostia and neighborhoods across the District.
- Local, independent contractors
- Free referral service
- No obligation
Is your address covered?
Enter your ZIP code or city.
Local know-how
Wet basements and crawl spaces in Washington, DC
DC’s rowhomes and townhouses frequently have English basements used as apartments or living space, often in buildings more than a century old. Brick foundation walls, shared walls with neighbors and an older combined sewer system in much of the city make leaks and backups common after heavy storms.
Partner contractors install interior drainage and sump pumps, repair cracks, waterproof basement entries and stairwells, and can address backflow problems – with attention to the tight access typical of city rowhomes.
Key facts: wet basements in Washington, DC
- Weather and ground: About one-third of the District is served by a combined sewer system (DC Clean Rivers Project).
- Main local risk: Sewer backups through floor drains during intense storms, in rowhomes that are often more than a century old.
- Typical cost: most basement waterproofing projects cost about $3,000–$10,000, with an average near $5,000 (Fixr). No official local average is published.
- How to get help: call the number on this page to be connected with an independent local waterproofing contractor. The call is free and there is no obligation.
Updated November 2026. Sources are listed at the end of this page.
DC basements in numbers
About one-third of the District – mostly the older neighborhoods – is served by a combined sewer system, where stormwater and wastewater share one pipe (DC Clean Rivers Project). During intense storms those pipes can surcharge and push water back into basements through floor drains and fixtures. Neighborhoods like Bloomingdale and LeDroit Park flooded repeatedly, including in July 2012, and record rainfall on September 10, 2020 caused backups across more of the city.
The housing makes it costly. DC’s rowhomes and townhouses, many more than a century old, often have English basements used as apartments or living space, with brick foundation walls shared with neighbors. Any water – from the sewer, the ground or a neighbor’s downspout – damages finished space.
DC Water’s backwater valve rebate
DC Water runs a Backwater Valve Rebate Program. According to DC Water, eligible property owners in the combined sewer area with a documented sewer backup since 2012 can be reimbursed 100% up to $6,000 for buying and installing a backwater valve, and the program was expanded to residents outside the combined sewer area with documented backups during the July 1, 2012 and September 10, 2020 storms. Check the current rules and application on DC Water’s website before the work is done.
A backwater valve stops sewer water from coming back in. It does not stop groundwater seeping through walls; for that you need drainage – see how to tell the difference.
Neighborhood notes
- Bloomingdale, LeDroit Park, Eckington: historic flooding from sewer surcharges in intense storms; backwater valves and keeping basement entries above street runoff matter most.
- Capitol Hill, Shaw, Logan Circle, Columbia Heights, Petworth: 19th- and early-20th-century rowhomes with English basements and brick walls. Seepage through masonry, leaking front areaways and stairwell drains clogged with leaves are common.
- Brookland, Takoma, Chevy Chase DC: detached and semi-detached homes with more room outside, where gutters, grading and exterior drainage are realistic options.
- East of the Anacostia: hillside lots where runoff from above collects against the uphill foundation wall.
In every neighborhood, clean the drain at the bottom of the exterior basement stairwell before storm season – a clogged stairwell drain can send water straight under the basement door.
Typical costs in DC
| Item | Typical range | Source |
|---|---|---|
| Basement waterproofing, Washington, DC | $3,494–$8,219 (average $5,771) | Angi, Washington DC page |
| Waterproofing project, national | $3,000–$10,000 (about $5,000 on average) | Fixr, 2026 |
| Wet basement waterproofing, national | $2,300–$7,575 (average $4,920) | Angi |
| Epoxy crack injection | $350–$500 per crack | Fixr |
| Sump pump installation | $500–$4,000 (about $1,400 on average) | This Old House, 2026 |
Rowhome access, hand-carried debris, English-basement finishes and permit requirements tend to push DC jobs toward the upper end. Ask whether the backwater valve rebate applies before you budget.
Published figures for orientation (checked fall 2026), not quotes.
Permits and hiring in DC
Building permits in the District are issued by the Department of Buildings, and home improvement contractors are licensed by the District; ask for the license, proof of insurance and who pulls the permit. For a backwater valve, follow DC Water’s rebate requirements so the installation qualifies.
Sources
- NCPC submission, DC Clean Rivers Project (combined sewer area about one-third of the District)
- DC Water: Backwater valve rebate program
- Angi: Basement waterproofing cost in Washington, DC
- Fixr: How much does it cost to waterproof a basement? (2026 data)
- Angi / HomeAdvisor national figures, as quoted by Bob Vila: Basement waterproofing cost
- This Old House: Sump pump cost
How it works
Get help in three simple steps
- Call usTell a waterproofing specialist what is happening in your basement. It takes about two minutes.
- Get matchedYou are connected with an independent, local contractor who serves your ZIP code.
- Get your basement fixedThe contractor looks at your basement, explains your options and gives you a price. You decide – no obligation.
Services
What we help with
Basement Waterproofing
Stop basement leaks for good.
Learn more →Sump Pump Installation
New sump pumps, replacements and battery backups installed by local contractors.
Learn more →Foundation Crack Repair
Leaking wall cracks, horizontal cracks and bowing basement walls: what they mean, how they are repaired and what it costs.
Learn more →Crawl Space Encapsulation
Damp, moldy or smelly crawl space? How crawl space encapsulation, drainage and dehumidifiers work and what they cost.
Learn more →French Drains & Yard Drainage
French drains, downspout extensions and grading keep water away from your foundation.
Learn more →Basement Mold & Humidity
Musty basement? Mold on walls or belongings? How moisture control, dehumidifiers and waterproofing stop basement mold from coming back.
Learn more →Service area
Communities we serve
- Naval Anacost Annex
- Washington
Show all 276 ZIP codes served
20001, 20002, 20003, 20004, 20005, 20006, 20007, 20008, 20009, 20010, 20011, 20012, 20013, 20015, 20016, 20017, 20018, 20019, 20020, 20022, 20024, 20026, 20027, 20029, 20030, 20032, 20033, 20035, 20036, 20037, 20038, 20039, 20040, 20041, 20042, 20043, 20044, 20045, 20049, 20050, 20052, 20053, 20055, 20056, 20057, 20058, 20059, 20060, 20061, 20062, 20063, 20064, 20066, 20069, 20070, 20071, 20073, 20074, 20075, 20077, 20078, 20080, 20081, 20082, 20090, 20091, 20201, 20202, 20203, 20204, 20206, 20207, 20208, 20210, 20211, 20212, 20213, 20214, 20215, 20216, 20217, 20218, 20219, 20220, 20221, 20222, 20223, 20224, 20226, 20227, 20228, 20229, 20230, 20232, 20233, 20235, 20237, 20238, 20239, 20240, 20241, 20244, 20245, 20250, 20251, 20252, 20254, 20260, 20261, 20262, 20265, 20266, 20268, 20270, 20277, 20289, 20299, 20301, 20303, 20306, 20310, 20314, 20317, 20318, 20319, 20330, 20340, 20350, 20355, 20370, 20372, 20373, 20374, 20375, 20376, 20380, 20389, 20390, 20392, 20401, 20402, 20403, 20404, 20405, 20406, 20407, 20408, 20409, 20410, 20411, 20412, 20413, 20414, 20415, 20416, 20417, 20418, 20419, 20420, 20421, 20422, 20423, 20424, 20425, 20426, 20427, 20428, 20429, 20431, 20433, 20434, 20435, 20436, 20437, 20439, 20440, 20441, 20442, 20444, 20447, 20451, 20453, 20456, 20460, 20463, 20468, 20469, 20470, 20472, 20500, 20501, 20502, 20503, 20504, 20505, 20506, 20507, 20508, 20509, 20510, 20511, 20515, 20520, 20521, 20522, 20523, 20524, 20525, 20526, 20527, 20528, 20529, 20530, 20531, 20533, 20534, 20535, 20536, 20537, 20538, 20539, 20540, 20541, 20542, 20543, 20544, 20546, 20547, 20548, 20549, 20551, 20552, 20553, 20554, 20555, 20557, 20559, 20560, 20565, 20566, 20570, 20571, 20572, 20573, 20575, 20576, 20577, 20578, 20579, 20580, 20581, 20585, 20586, 20588, 20590, 20591, 20593, 20594, 20597, 20598, 20599, 56901, 56902, 56904, 56915, 56920, 56933, 56935, 56944, 56945, 56950, 56965, 56967, 56972, 56998, 56999
FAQ
Questions from Washington, DC homeowners
Other service areas:
Does it cost anything to call?
No. Our referral service is free for homeowners, and you are never obligated to hire anyone.
How do I know if my address is covered?
Enter your ZIP code on this page or simply call. The specialist will confirm right away.
Will DC Water pay for my backwater valve?
Possibly. DC Water’s Backwater Valve Rebate Program reimburses eligible property owners with documented sewer backups up to $6,000 for buying and installing a backwater valve. Check eligibility and apply through DC Water before the work.
Water comes up through my English basement floor drain in storms. What is it?
Most likely a sewer backup from the combined sewer system. A backwater valve on the sewer line is the fix; waterproofing the walls will not stop it.
Get your basement dry.
Call now and get connected with a local contractor in Washington, DC.
- Local, independent contractors
- Free referral service for homeowners
- No obligation to hire
One call connects you with a contractor who serves your area.