Local waterproofing contractors in 17 states · one call, no obligation
Get connected now(888) 417-3828
Local contractors in 17 states

Foundation Crack Repair & Bowing Walls

Leaking wall cracks, horizontal cracks and bowing basement walls: what they mean, how they are repaired and what it costs.

  • Local, independent contractors
  • Free referral service
  • No obligation

Do we serve your area?

Enter your ZIP code or city.

Not every foundation crack is a crisis, but every crack should be understood. Thin vertical cracks in poured-concrete walls are common shrinkage cracks and are usually fixed by injection if they leak. Horizontal cracks, stair-step cracks in block walls and walls that lean inward point to soil pressure and should be inspected soon.

Repair methods

Polyurethane or epoxy injection

Seals leaking cracks in poured walls from the inside. Epoxy also restores structural strength.

Carbon-fiber straps

Low-profile reinforcement that stops walls with minor bowing from moving further.

Wall anchors and steel braces

For walls that have moved more, anchors are set in the soil outside and connected through the wall, or steel beams brace the wall from floor to joists.

Typical costs

ItemTypical rangeSource
Epoxy crack injection$350–$500 per crackFixr
Carbon fiber straps (per project)about $2,500–$6,000 on averageAcculevel
Wall anchor system (per project)about $4,000–$8,000 on averageAcculevel
Single wall anchorabout $830–$1,000 eachAcculevel

Published figures for orientation (checked fall 2026), not quotes.

Which cracks matter most

  • Thin vertical cracks in poured walls are usually shrinkage cracks. They are mainly a leak problem and are typically sealed by injection.
  • Horizontal cracks in block or poured walls are the classic sign of soil pressure pushing the wall inward and should be evaluated by a structural engineer or experienced foundation contractor.
  • Stair-step cracks along block mortar joints, especially with bulging, point to movement too.

Measure and photograph cracks over time; changes mean the wall is still moving. More in bowing basement walls.

How crack repair is usually done

Injection is the standard fix for a leaking crack in a poured-concrete wall. The contractor sets small ports along the crack, seals the surface and pumps in a liquid that fills the crack through the full wall thickness. Epoxy bonds the two sides together; flexible polyurethane foam is often chosen when the main goal is stopping water. Fixr puts typical injection at $350–$500 per crack.

Block walls are different. Water in a block wall moves through the hollow cores, so sealing one crack often just moves the leak. Leaking block walls are usually handled with interior drainage that collects water from the cores, and cracks that come with bowing need structural repair.

Structural options for walls that have moved

  • Carbon fiber straps are bonded to the wall for walls that have moved only a little. They stop further movement but do not push the wall back. Acculevel puts typical projects at about $2,500–$6,000.
  • Steel beams are anchored to the floor and the framing above; some can be tightened over time.
  • Wall anchors connect a plate on the wall to an anchor in stable soil in the yard. Acculevel lists about $830–$1,000 per anchor and about $4,000–$8,000 for a typical project.

Which one fits depends on how far the wall has moved, what is outside it and how much room there is in the yard. For any wall that leans or bulges, ask for an evaluation by a structural engineer or an experienced foundation contractor.

Stop the cause, not only the crack

Most cracks leak because water collects against the wall outside. Check that gutters are clear, downspouts discharge well away from the house and the ground slopes away from the foundation – the International Residential Code calls for at least 6 inches of fall within the first 10 feet. Clay soil that stays wet is also what pushes walls inward, so drainage helps both leaks and movement.

Related guides

Sources

FAQ

Common questions

Which cracks are serious?

Horizontal cracks, stair-step cracks in block walls that come with bulging, cracks that keep widening and any wall that leans inward should be looked at by a structural engineer or experienced foundation contractor soon. Thin vertical cracks in poured walls are usually shrinkage cracks that mainly leak.

Will my wall keep moving?

Walls pushed by saturated soil usually keep moving slowly. Stabilizing early is much cheaper than rebuilding a wall later.

Ready for a dry basement?

Get connected with a local contractor who can fix it for good.

  • Local, independent contractors
  • Free referral service for homeowners
  • No obligation to hire
Get connected now(888) 417-3828

One call connects you with a contractor who serves your area.

Tap to get connected now(888) 417-3828